TS/MP 2.5 System Management Manual

Cause. A PATHMON process dump was taken by operator request or because the PATHMON
DUMP attribute was d at the time an internal error occurred.
Effect. Memory is written to the named dump file.
Recovery. If the dump was taken by operator request, this message is informational only; no
corrective action is needed. If an internal error occurred, contact your HP representative and
provide all relevant information as follows:
• Descriptions of the problem and accompanying symptoms
• Details from the messages generated
• Your PATHMON configuration file and the PATHMON process version
• A description of the application task that was in progress when the error was encountered
• Supporting documentation such as Event Management Service (EMS) logs, trace files, and
dump files, if applicable
If your local operating procedures require contacting the Global Customer Support Center (GCSC),
supply your system number and the numbers and versions of all related products as well.
1069
*1069* ERROR FROM SYSTEM PROCEDURE
Cause. The operating system returned an error on a call to a Guardian procedure.
Effect. The effect depends on the error.
Recovery. Contact your HP representative and provide all relevant information as follows:
• Descriptions of the problem and accompanying symptoms
• Details from the messages generated
• Your PATHMON configuration file and the PATHMON process version
• A description of the application task that was in progress when the error was encountered
• Supporting documentation such as Event Management Service (EMS) logs, trace files, and
dump files, if applicable
If your local operating procedures require contacting the Global Customer Support Center (GCSC),
supply your system number and the numbers and versions of all related products as well.
1070
*1070* BACKUP PROCESS NOT UP
Cause. A CONTROL, PRIMARY, or SWITCH command cannot complete because the PATHMON
process or the TCP backup process is not running.
Effect. The command fails.
Recovery. Start the object backup process, and reissue the command.
1071
*1071* PATHMON, CHECKPOINT FAILURE (%errnum)
Cause. An error occurred during an operating system CHECKPOINT procedure operation. %errnum
is the CHECKPOINT error number.
PATHMON Messages 227