TS/MP 2.5 System Management Manual

Effect. The PATHMON process stops the backup process, if it is running, and attempts to start a
new backup process.
Recovery. For information concerning the CHECKPOINT error, see the Guardian Procedure Calls
Reference Manual.
1072
*1072* PATHMON, CREATE BACKUP FAILURE : < nested-message >
Cause. The PATHMON process could not create the backup process. The nested message indicates
the reason.
Effect. The PATHMON process runs without a backup.
Recovery. For additional information, see the description associated with the nested message.
1073
*1073* PATHMON, CHECKOPEN FAILURE (%errnum)
Cause. An error occurred during an operating system CHECKOPEN operation. The error number
identifies the CHECKOPEN error code.
Effect. The primary file is closed. Any additional effect depends on the file that was being opened.
Recovery. For information concerning the specified CHECKOPEN error, see the Guardian Procedure
Calls Reference Manual.
1074
*1074* PATHMON, CHECKCLOSE FAILURE (%errnum)
Cause. An error occurred during an operating system CHECKCLOSE operation. The error number
indicates the reason.
Effect. None
Recovery. If recovery is necessary, see the Guardian Procedure Calls Reference Manual for
information concerning the specified CHECKCLOSE error.
1077
*1077* PATHMON, TAKEOVER BY BACKUP
Cause. The PATHMON backup process took over processing because the primary processor failed
or because a PRIMARY or SWITCH command was run.
Effect. If the primary processor failed, the PATHMON process runs without a backup.
Recovery. If the primary processor failed, reload the processor so that the PATHMON process can
create a backup process. If a PRIMARY or SWITCH command was run, this is an informational
message only; no corrective action is needed.
1078
*1078* PATHMON, FATAL ERROR ( %P-register )
228 PATHMON Messages (Numbers 1000-1499)