TS/MP 2.5 System Management Manual

1081
*1081* PATHCTL FILE IS INCOMPATIBLE (COLD START REQUIRED)
Cause. During a cool start, the PATHMON configuration file was not compatible with the currently
running PATHMON process. This incompatibility can result from these either the PATHMON
configuration file is a pre-D30 version of the file (which is not compatible with D30 versions of the
PATHMON process), or the PATHMON configuration file has an invalid file code (the valid file
code is 310).
Effect. The cool start fails.
Recovery. Cold start the PATHMON environment.
1083
*1083* link manager-name, LINE TO TCP IS DOWN
Cause. The Expand link to the external PATHMON environment is down.
Effect. The PATHMON process cannot access the specified LINKMON process or TCP.
Recovery. Establish a link to the system in which the LINKMON process or TCP is running.
1085
*1085* PATHMON MUST NOT RUN WITH HIGHPIN SET
Cause. You attempted to set the HIGHPIN attribute to ON for the PATHMON process.
Effect. The PATHMON process cannot run.
Recovery. Reset the HIGHPIN attribute to OFF and reissue the START command.
1086
*1086* TERM TYPE NOT DEFINED FOR PROGRAM
Cause. The TYPE parameter of the RUN PROGRAM command is undefined or mismatched, or the
PROGRAM definition has not been added.
Effect. The operation fails.
Recovery. Supply a value for the RUN PROGRAM TYPE parameter.
1087
*1087* TERMINAL STOPPED BY OPERATOR
Cause. The terminal running the program was stopped by the STOP TERM command.
Effect. The terminal operation stops.
Recovery. Informational message only; no corrective action is needed.
1088
*1088* TERMINAL ABORTED BY OPERATOR
230 PATHMON Messages (Numbers 1000-1499)