TS/MP 2.5 System Management Manual

Recovery. If the problem persists, contact your HP representative and provide all relevant information
as follows:
• Descriptions of the problem and accompanying symptoms
• Details from the messages generated
• Your PATHMON configuration file and the PATHMON process version
• A description of the application task that was in progress when the error was encountered
• Supporting documentation such as Event Management Service (EMS) logs, trace files, and
dump files, if applicable
If your local operating procedures require contacting the Global Customer Support Center (GCSC),
supply your system number and the numbers and versions of all related products as well.
1095
*1095* ILLEGAL CPU NUMBER
Cause The processor number specified in an ALTER, SET, or CONTROL command was not in the
range 0-15 or was not the number of a processor on your system.
Effect. The command fails.
Recovery. Reissue the command, supplying the correct processor number.
1100
*1100* TCP tcp-name, TOO MANY TCP ENTRIES
Cause. The number of TCP descriptions has reached the maximum value specified for the MAXTCPS
attribute of the SET PATHWAY command.
Effect. The ADD TCP command fails.
Recovery. Shut down the PATHMON environment. Increase the value of the MAXTCPS attribute
(assuming it is not at the maximum allowable value). Reissue the ADD TCP command.
1101
*1101* TERM term-name, TOO MANY TERM ENTRIES
Cause. The number of terminal descriptions has reached the maximum value specified for the
MAXTERMS attribute or the MAXPROGRAMS attribute of the SET PATHWAY command.
Effect. The ADD TERM or RUN PROGRAM command fails.
Recovery. Increase the value of the MAXTERMS attribute and reissue the ADD TERM command;
or, increase the value of the MAXPROGRAMS attribute and reissue the RUN PROGRAM command.
1102
*1102* SERVER server-class, TOO MANY SERVER ENTRIES
Cause. The number of server class descriptions has reached the maximum value specified for the
MAXSERVERCLASSES attribute of the SET PATHWAY command.
Effect. The ADD SERVER or ALTER SERVER command fails.
232 PATHMON Messages (Numbers 1000-1499)