TS/MP 2.5 System Management Manual

Cause. The maximum number of ACS subsystem process, TCP, and external TCP processes has
exceeded the total number of link managers allowed (currently 800).
Effect. The bad value (MAXEXTERNALCPS, MAXLINKMONS or MAXTCPS) is rejected and the SET
PATHWAY command fails.
Recovery. Re-enter the values of MAXEXTERNALCPS, MAXLINKMONS and MAXTCPS, after ensuring
that their sum does not exceed the value of the maximum link managers allowed (currently 800).
1166
*1166* AUDIT MSG <audit msg>
Cause. PATHCOM command (ABORT/ADD/ALTER/DELETE/FREEZE/STOP/THAW/START) is
issued on the objects configured under PATHMON.
Effect. None.
Recovery. Informational message only; no corrective action is needed.
1167
*1167* TERM <Term-Name>, TERM SHOULD BE IN STOPPED STATE
Cause. You have issued a CONTROL TERM COUPLE request when the TERM is not in the STOPPED
state.
Effect. The request is not completed successfully.
Recovery. Ensure that the TERM is in the STOPPED state before issuing the COUPLE request.
1168
*1168* REBALANCE PROCESSOR DOWN
Cause. The processor number mentioned in the CONTROL PATHMON SPREBALANCECPU command
is down.
Effect. Rebalancing of the server processes will not be started.
Recovery. Reload the processor, and then reissue the command.
1169
*1169* NO SERVER PROCESS IS QUALIFIED FOR REBALANCING
Cause. No special server processes available for rebalancing.
Effect. None.
Recovery. Informational message only; no corrective action is required.
1170
*1170* INVALID MODE: PATHMON SPREBALANCE MODE NOT MANUAL
Cause. Pathway attribute SPREBALANCEMODE is not MANUAL.
Effect. Rebalancing of the server processes cannot be started.
PATHMON Messages 245