TS/MP 2.5 System Management Manual

Cause. The PDMHELP help file is not found at the location where PDMCOM resides
Effect. HELP command, issued to receive help on the PDMCOM commands or the PDMCOM error
numbers, fails.
Recovery. Place the PDMHELP help file at the location where PDMCOM resides. If the file is missing
from the system, then reinstall the product.
1508
*1508* No help available
Cause. Help could not be made available at this time.
Effect. HELP command, issued to receive help on the PDMCOM commands or the PDMCOM error
numbers, fails.
Recovery. Usually, this error follows error number 1507 or 1506. Correct the earlier error, and
then reissue the command.
1509
*1509* FC String too long
Cause. The string entered with FC command is too long.
Effect. The command fails.
Recovery. This error is very unlikely. Contact your Global Mission Critical Support Center (GMCSC)
with a description of the application task that was in progress when the error was encountered.
1510
*1510* Invalid command for object type.
Cause. PDMCOM was not able to parse the command correctly.
Effect. The command fails.
Recovery. This error is very unlikely. Contact your Global Mission Critical Support Center (GMCSC)
with a description of the application task that was in progress when the error was encountered.
1511
*1511* COMMUNICATION FAILED WITH <process name>.
Cause. PDMCOM failed to communicate with the specified process name.
Effect. The command fails.
Recovery. Restart the Access Control Server (ACS). If this problem persists, contact your HP Nonstop
representative.
1512
*1512* <freeze/thaw/stop/start> FAILED FOR SERVER <server
name> IN PATHMON <pathmon name>.
Cause. PDMCOM failed to FREEZE or STOP the specified server in the specified PATHMON.
PDMCOM Messages 249