TS/MP 2.5 System Management Manual

Effect. The command is aborted.
Recovery. Determine the reason for failure and initiate the corrective action accordingly. If the
error is displayed during execution of an ALTER-DOMAIN command, then check the configuration
of the server throughout the domain. Any inconsistency must be corrected manually.
1513
*1513* INTERNAL ERROR - <error message>.
Cause. Some unexpected error occurred.
Effect. The command is aborted.
Recovery. Take appropriate action depending on the error message.
1514
*1514* LOCK FAILED FOR SERVER <server name> IN ENVIRONMENT
<domain name or pathmon name>.
Cause. The server entry, for which a FREEZE, STOP, ALTER, THAW, START, or ALTER-DOMAIN
command was issued, is already locked.
Effect. The command is aborted.
NOTE: The Lock failed error is also displayed when PDMCOM fails to communicate with
the ACS subsystem. If the error appears, verify that the ACS subsystem is up and running.
Recovery. Wait for some time, and then reissue the command.
1515
*1515* DOMAIN NOT OPEN.
Cause. OPEN <domain name> is not issued prior to a domain-level command.
Effect. The domain related commands cannot be issued.
Recovery. Reissue the failed command after issuing an OPEN <domain name> command.
1516
*1516* SERVERCLASS <servername> NOT CONFIGURED IN SUFFICIENT
PATHMONS IN THE DOMAIN <domain name>.
Cause. The number of PATHMONs in which the server class is configured, is less than or equal to
one.
Effect. The command is aborted.
Recovery. Reissue the command after adding the serve class to more than one PATHMONs in the
domain.
1517
*1517* NONEXISTENT DOMAIN.
250 PDMCOM Messages (Numbers 1500-1999)