TS/MP 2.5 System Management Manual

Cause. PDMCOM failed to read an OBEY file.
Effect. The command fails.
Recovery. The OBEY file might be corrupt. Create a new OBEY file and reissue the command. If
the problem persists, contact your HP NonStop representative.
1529
*1529* FC COMMAND IS INVALID IN AN OBEY FILE.
Cause. The FC command is issued in an OBEY file.
Effect. The command fails.
Recovery. Remove the FC command from the OBEY file and reissue the command.
1530
*1530* REDISPLAY COMMAND IS INVALID IN OBEY FILE.
Cause. The Redisplay command is issued in an OBEY file.
Effect. The command fails.
Recovery. Remove the Redisplay command from the OBEY file and reissue the command.
1531
*1531* RE-EXECUTE COMMAND IS INVALID IN OBEY FILE.
Cause. The Reexecute command is issued in an OBEY file.
Effect. The command fails.
Recovery. Remove the Reexecute command from the OBEY file and reissue the command.
1532
*1532* HISTORY COMMAND IS INVALID IN OBEY FILE.
Cause. The HISTORY command is issued in an OBEY file.
Effect. The command fails.
Recovery. Remove the HISTORY command from the OBEY file and reissue the command.
1533
*1533* CAN'T QUALIFY GIVEN FILE NAME WITH DEFAULT VOLUME
INFORMATION.
Cause. PDMCOM cannot interpret the file name because it might be invalid.
Effect. The command fails.
Recovery. Check the file name supplied. Correct any error in the file name. If the problem persists,
contact your HP NonStop representative.
PDMCOM Messages 253