TS/MP 2.5 System Management Manual

2035
*2035* TOO MANY NESTED OBEY FILES (MAX=4)
Cause. The number of nested command files exceeded the maximum depth of 4.
Effect. The command fails.
Recovery. Rewrite the command files with 4 or less nested files.
2036
*2036* TOO MANY CPU PAIRS SPECIFIED (MAX=16)
Cause. The number of processor pairs exceeded the maximum number of 16.
Effect. The command fails.
Recovery. Specify 16 or less processor pairs.
2037
*2037* NUMBER OF PREDEFINED SERVERS WOULD EXCEED MAXSERVERS
Cause. The number of defined servers exceeded the maximum value defined for the MAXSERVERS
attribute.
Effect. The command fails.
Recovery. Reduce the number of defined servers or increase the value of the MAXSERVERS attribute
in the SET SERVER command.
2038
*2038* TOO MANY PARAMS
Cause. The limit for the configured number of PARAMs is reached.
Effect. The SET SERVER PARAM command fails.
Recovery. Reduce the number of PARAM messages.
2040
*2040* PATHCOM TRAP T = %trap S = %s-reg P = %p-reg
E = %e-reg L = %l-reg
Cause. PATHCOM is trapped because of a hardware or software failure. These values reflect the
process environment at the time PATHCOM failed:
is the number of the trap.%trap
is the stack register.%s-reg
is the program counter register.%p-reg
is the environment register.%e-reg
is the local register.%l-reg
PATHCOM Messages 261