TS/MP 2.5 System Management Manual

2075
*2075* CMDVOL NODE VALUE CONFLICTS WITH PATHWAY
NODEINDEPENDENT ON
Cause. The SET PATHWAY NODEINDEPENDENT attribute is set to ON, but a value other than
\* was specified by the CMDVOL command as the node name in the default settings for file name
expansion.
Effect. The \* node name specification conflicts with the NODEINDEPENDENT attribute setting.
Recovery. Perform one of these:
• SET PATHWAY NODEINDEPENDENT to OFF and cold start the PATHWAY object.
• Delete the node name value specified by the CMDVOL command.
• Change the node name specified by the CMDVOL command to \*.
2079
*2079* ILLEGAL CPU WEIGHT
Cause. The CPU weight is not in the range of 1 through 100. Or, summation of all the weights is
not equal to 100.
Effect. The command fails.
Recovery. Redefine the CPU weight with a correct value.
2080
*2080* ILLEGAL REBALANCE MODE
Cause. Pathway attribute SPREBALANCEMODE is not MANUAL, AUTO, or DISABLE.
Effect. Pathway attribute SPREBALANCEMODE will not be set.
Recovery. Set SPREBALANCEMODE as MANUAL, AUTO, or DISABLE.
268 PATHCOM Messages (Numbers 2000-2999)