TS/MP 2.5 System Management Manual

ManualsBrandsHP ManualsServerHP Integrity NonStop H-Series

261

262

263

264

265

266

267

268

269

270

3117

*3117* link manager-name, SERVER CLASS UNDEFINED

Cause. The server class specified in a Pathsend statement is not defined for the PATHMON

environment.

Effect. The operation fails.

Recovery. Isolate and correct the problem within the requestor program. See the TS/MP 2.5

Pathsend and Server Programming Manual.

3118

*3118* link manager-name, REQUEST INVALID FOR SERVER STATE

Cause. The state of the specified server does not allow the requested operation to occur. This is

an internal error.

Effect. The operation fails.

Recovery. Contact your HP representative and provide all relevant information as follows:

• Descriptions of the problem and accompanying symptoms

• Details from the messages generated

• Your PATHMON configuration file and PATHMON process version

• A description of the application task that was in progress when the error was encountered

• Supporting documentation such as Event Management Service (EMS) logs, trace files, and

dump files, if applicable

If your local operating procedures require contacting the Global Customer Support Center (GCSC),

supply your system number and the numbers and versions of all related products as well.

3200

*3200* link manager-name, INVALID FORMAT MESSAGE RECEIVED BY

TCP

Cause. A LINKMON process or terminal control process (TCP) received an invalid request from

the PATHMON process. This error usually occurs when incompatible versions of the PATHMON

process and the LINKMON process or TCP are running at the same time.

Effect. The request cannot be processed.

Recovery. Use versions of the PATHMON process and the LINKMON process (or TCP) that are

compatible with each other. If the problem persists, contact your HP representative and provide

all relevant information as follows: