TS/MP 2.5 System Management Manual

1029: ZACL-EVT-CPU-STARTED
The ACS subsystem processes in the specified CPU were started in response to a START command
or were restarted in response to a CONTROL command.
Unconditional Tokens
ZACL-TKN-EVENT-LEVEL token-type ZACL-TYP-EVENT-LEVEL.
ZACL-TKN-EVENT-CPU-NUMBER token-type ZSPI-TYP-INT.
Event-Message Text
1029 - Core processes started in CPU cpu-number
Token Descriptions
ZACL-TKN-EVENT-LEVEL
has the value of ZACL-VAL-EVENT-LEVEL-STATUS.
ZACL-TKN-EVENT-CPU-NUMBER
contains the number of the physical CPU that was started on the system where the event message
was generated. This token is the subject of the event message.
Effect. Pathsend operations initiated in the CPU no longer fail with FESCLINKMONCONNECT
errors.
Recovery. This is an informational message only; no corrective action is needed.
EMS Messages 1030 through 1039
1030: ZACL-EVT-CPU-STOPPED
One or all of the ACS subsystem processes in a CPU on the local system failed or were stopped
in response to a STOP command. If this error occurred due to a failure, the physical CPU might
have failed.
Unconditional Tokens
ZACL-TKN-EVENT-LEVEL token-type ZACL-TYP-EVENT-LEVEL.
ZACL-TKN-EVENT-CPU-NUMBER token-type ZSPI-TYP-INT.
Event-Message Text
1030 - Core processes stopped in CPU cpu-number
Token Descriptions
ZACL-TKN-EVENT-LEVEL
has the value of ZACL-VAL-EVENT-LEVEL-ERROR.
ZACL-TKN-EVENT-CPU-NUMBER
contains the number of the physical CPU in which the ACS subsystem processes were stopped on
the system where the event message was generated. This token is the subject of the event message.
Effect. Pathsend operations initiated in the CPU fail with FESCLINKMONCONNECT errors until
the core processes are restarted.
296 ACS Subsystem Messages