TS/MP Management Programming Manual (H06.05+, J06.03+)

ACS Subsystem Messages
HP NonStop TS/MP Management Programming Manual—540082-005
14-9
EMS Messages 1000 through 1009
ZACL-TKN-EVENT-CPU-NUMBER
contains the number of the CPU on the local system in which the process could not
be started. This token is the subject of the event message.
ZACL-TKN-EVENT-PROCESS-NAME
contains the name of the process that was not created.
ZACL-TKN-EVENT-ERROR-CODE
contains the process-creation error code returned by the PROCESS_LAUNCH_()
procedure.
ZACL-TKN-EVENT-ERROR-DETAIL
contains additional information about the process-creation error returned by the
PROCESS_LAUNCH_() operation. If the value of this token is 0 (zero), the token is
null and can be regarded as omitted from the message.
ZACL-TKN-EVENT-FILE-NAME
contains the Guardian name of a program file, library file, swap file, home terminal,
or process name associated with the major error code returned by the
PROCESS_LAUNCH_() operation. This token is omitted if no file is associated
with the major error code.
Effect. No ACS subsystem processes are started in the specified CPU. If the
PROCESS_LAUNCH_() operation returned an error indicating a programming error in
the domain coordinator process, the event is fatal; the primary domain coordinator
process terminates abnormally and produces a SaveAbend file.
Recovery. Correct the condition that caused the process creation failure then use the
CONTROL ACS command to restart the ACS subsystem processes in the CPU. If the
event is fatal or the problem persists, contact your HP support analyst.