TS/MP Management Programming Manual (H06.05+, J06.03+)

Configuration Limits and Defaults
HP NonStop TS/MP Management Programming Manual—540082-005
A-3
Table A-2. Limits and Defaults for Parameters (page 1 of 9)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults
ARGLIST ZPWY-TKN-
DEFSCARGLIST
Values: OSS process startup argument list; from
2 to 24,000 characters.
ZPWY-TKN-DEF-SCENV +
ZPWY-TKN-DEF-SCARGLIST
cannot exceed 24,000 bytes.
Default: Empty argument list
ASSOCIATIVE ZASSOCIATIVE Values: ON | OFF
Default: OFF
AUTORESTART ZAUTORESTART Values: 0 through 32,767
Value should be greater than 0.
Default: 0
BACKUPCPU ZCPU
ZCPUPAIR
Values: 0 through 15
Value should be a CPU number
that is greater than plus or minus
1 from the primary CPU.
Default: Depends on command
COUNT N.A. Values: 0 through 65,536
Default: 1
CPU
CPUS
ZCPU
ZCPUPAIR
Values: For CPU pairs, maximum of 16
pairs, 0 through 15.
Backup CPU numbers need not
be unique.
For a sequence of single CPUs,
maximum of 16 CPUs, 0 through
15. Each CPU must be unique.
Default: Determined by PATHMON (all
available CPUs are used).
CREATEDELAY ZCREATEDELAY Values: HRS | MINS | SECS
0 through 16,383 SECS, or
0 through 1092 MINS, or
0 through 18 HRS
The time set for this parameter
may be added to the response
time for all transactions; therefore,
the value should be small.
Default: 1 MINS