TS/MP Management Programming Manual (H06.05+, J06.03+)

Configuration Limits and Defaults
HP NonStop TS/MP Management Programming Manual—540082-005
A-7
MAXPATHCOMS ZMAXPATHCOMS Values: 1 through 100
Maximum number of concurrent
openers of PATHMON (TCP, external
TCP, LINKMON or ACS subsystem
processes, PATHCOM, and SPI) must
not exceed 800.
For production, the value for this
parameter should be large enough to
allow for parallel interfaces (multiple
PATHCOM and SPI processes).
Default: 5
MAXSERVERCLA
SSES
ZMAXSERVERCL
ASSES
Values: 0 through 4095
Total of MAXSERVERS values for
all server classes must not exceed
value of MAXSERVERPROCESSES.
Default: N.A.
MAXSERVERPR
OCESSES
ZMAXSERVERPR
OCESSES
Values: 0 through 4095
Default: N.A.
MAXSERVERS ZMAXSERVERS Values: 0 through 4095
Total of MAXSERVERS values for all
server classes must not exceed value of
MAXSERVERPROCESSES.
Default: 1
MAXSPI ZMAXSPI Values: 1 through 100
Maximum number of concurrent
openers of PATHMON (TCP, external
TCP, LINKMON or ACS subsystem
processes, PATHCOM, and SPI)
must not exceed 800.
For production, the value for this
attribute should be large enough to
allow for parallel interfaces (multiple
PATHCOM and SPI processes).
Default: 1
MAXSTARTUPS ZMAXSTARTUPS Values: 0 through 4095
Value must not exceed value of
MAXSERVERCLASSES.
Default: N.A.
Table A-2. Limits and Defaults for Parameters (page 5 of 9)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults