TS/MP Management Programming Manual (H06.05+, J06.03+)

Configuration Limits and Defaults
HP NonStop TS/MP Management Programming Manual—540082-005
A-11
STDERR ZPWY-TKN-
DEFSCSTDERR
Values: Name of the OSS stderr (standard
error) file.
Must not exceed 1024 bytes.
Default: None
STDIN ZPWY-TKN-
DEFSCSTDIN
Values: Name of the OSS stdin (standard
input) file.
Must not exceed 1024 bytes.
Default: None
STDOUT ZPWY-TKN-
DEFSCSTDOUT
Values: Name of the OSS stdout (standard
output) file.
Must not exceed 1024 bytes.
Default: None
TIMEOUT ZTIMEOUT Values: 0 through 16,383 SECS, or
0 through 1092 MINS, or
0 through 18 HRS
Default (LINKMON):
The LINKMON process waits indefinitely
for server I/O operation to complete
unless the send times out during the I/O
because of the timeout value specified in
the SERVERCLASS_SEND_ call.
Default (Pathway/TS TCP):
No timeout; TCP waits indefinitely for
server I/O operation to complete.
TMF ZTMF Values: ON | OFF
Default (SERVER): OFF
Pathway/TS Default (PROGRAM):ON
Pathway/TS Default (TERM):ON
UNTIL N.A. Values: DONE | TIMEOUT
Default: DONE
* PATHCOM is the interactive management interface.
** SPI is the DSM management programming interface.
*** For more information on TS/MP 2.3, refer TS/MP Manual for Limits Relief and Application Availabilty.
Table A-2. Limits and Defaults for Parameters (page 9 of 9)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults