TS/MP Release Supplement

SCF Command Reference for the ACS Subsystem
HP NonStop TS/MP Release Supplement—546055-006
8-14
ACS Subsystem-specific SCF Commands
ENABLE
restarts the ACS subsystem processes in the specified CPUs, if required.
LOG1 and LOG2
The new LOG1 and LOG2 options instruct all processors to stop using their current
log file and start using the new specified file. If the specified file is not supplied, that
log is disabled. If both logs are unusable or disabled, ACS uses $0.”EMS”:”ALL” for
log messages. For more information, see ADD Command
.
ALL
specifies all CPUs in the system.
ACSCTL
The new ACSCTL option instructs the BC process to start using a new or updated
ACSCTL file for its configuration information.
It is recommended that the modifications to the
ACSCTL file must obey the
following rules.
To add a new Pathway domain to the
ACSCTL file:
1. Shutdown any PATHMONs running in legacy mode if they have the same names
as the PATHMONs in the domain definition.
2. Update the
ACSCTL file.
3. Use the
ACSCTL option in the CONTROL command. This allows new send requests
to the domain.
4. Start the PATHMONs in the new Pathway domain.
To delete an existing domain from the
ACSCTL file:
1. Shutdown the PATHMONs in the Pathway domain.
2. Update the
ACSCTL file.
3. Use the
ACSCTL option in the CONTROL command.
To modify an existing domain in the
ACSCTL file:
1. Shutdown all PATHMONs in the Pathway domain.
2. Update the
ACSCTL file.
3. Use the
ACSCTL option in the CONTROL command.
4. Start the PATHMONs in the Pathway domain.