TS/MP Release Supplement

SCF Command Reference for the ACS Subsystem
HP NonStop TS/MP Release Supplement—546055-006
8-16
ACS Subsystem-specific SCF Commands
The new ACSCTL file removes PATHMON \A.$PM3 from Pathway domain %PMX. To
update the ACS subsystem with the new
ACSCTL file, perform the following steps:
1. Shutdown all PATHMONs in the Pathway domain
%PMX.
2. Update the
ACSCTL file.
3. Use the
CONTROL command and ACSCTL option.
4. Start PATHMONs
\A.$PM1 and \A.$PM2.
Examples
The following command restarts ACS subsystem processes in CPUs 2 and 3 on the
local system
\MARS:
CONTROL ACS $ZACS, PROCESSORLIST (2, 3), ENABLE
The following command restarts ACS processes in all CPUs on the remote system
\PLUTO:
CONTROL ACS \PLUTO.$ZACS, ALL, ENABLE
DELETE Command
Use the DELETE command to remove the ACS subsystem. This command deletes the
ACS object from the SCF subsystem configuration file (
BCINI) and then deletes the
BCINI file; it does not uninstall the ACS subsystem.
The command displays a prompt asking you to verify the command before it is run.
This is a sensitive command.
Syntax Summary
DELETE [ /OUT file-spec/ ] [ object-spec ]
Syntax Description
OUT file-spec
specifies a file for the output of this command. The file can be on the same
physical system as the ACS subsystem or on any system in the same Expand
network.
Note. Before issuing this command, you must do the following:
1. Stop the TS/MP server classes and PATHMON processes.
2. Stop the ACS subsystem.