TS/MP Release Supplement

SCF Command Reference for the ACS Subsystem
HP NonStop TS/MP Release Supplement—546055-006
8-18
ACS Subsystem-specific SCF Commands
Syntax Description
OUT file-spec
specifies a file for the output of this command. The file can be on the same
physical system as the ACS subsystem or on any system in the same Expand
network.
object-spec
specifies the name of the ACS object. The fully qualified object-spec has the
format:
[ ACS ] [ system-name.]$ZACS
system-name is the physical, Guardian name of the system in which the object is
being added and configured.
If you have specified the SCF object type (ACS) or any portion of the object name (
acs-spec) in a prior ASSUME command, you can omit it in this command. For
information on the
ASSUME command, see the SCF Reference Manual.
If you have not used a prior
ASSUME command and you omit system-name, the
command defaults to the local physical system.
DETAIL
specifies that the display includes additional detail information on the object.
Example 8-5
shows a display format with the DETAIL option.
asterisk (*)
indicates attributes that you can modify using the ALTER command.
subsystem-name
is the name of the subsystem.
Example 8-5. Display Format with DETAIL Option
subsystem-name INFO ACS [\ system-name.object-name]
ZACS
*Domain............domain-name
Processor status..nnnnnnnnnnnnnnnn
*LOG1..............logfile-name
*LOG2..............logfile-name
*ACSCTL.............acsctl-file
*HIGHPINROUTS........OFF