TS/MP Release Supplement

SCF Command Reference for the ACS Subsystem
HP NonStop TS/MP Release Supplement—546055-006
8-21
ACS Subsystem-specific SCF Commands
If you have specified the SCF object type (ACS) or any portion of the object name
(
acs-spec) in a prior ASSUME command, you can omit it in this command. For
information on the
ASSUME command, see the SCF Reference Manual.
If you have not used a prior
ASSUME command and you omit system-name, the
command defaults to the local physical system.
Display Format
where:
subsystem-name
is the name of the subsystem.
object-name
is the name of the object.
Example
The NAMES command:
NAMES ACS $ZACS
displays the ACS subsystem manager process on the local system, as follows:
ACS Names ACS \MARS.$ZACS
ACS
$ZACS
START Command
Use the START command to start the ACS subsystem. The START command reads
the configuration values stored in the
BCINI file and starts the subsystem. When the
subsystem successfully completes processing this command, ACS subsystem
processes are available in each processor in the system.
This is a sensitive command.
subsystem-name NAMES ACS object-name
subsystem-name
object-name
Note. 1. Before issuing this command, you must start the domain coordinator process
($ZACS).
2. If your application environment uses Pathsend requesters, you must start the ACS
subsystem before you start the PATHMON process.