TS/MP Release Supplement

SCF Command Reference for the ACS Subsystem
HP NonStop TS/MP Release Supplement—546055-006
8-25
ACS Subsystem-specific SCF Commands
PROCESSOR: 01
STATUS Command
Use the STATUS command to display the current operational status of the ACS
subsystem. The information displayed depends on the state of the ACS subsystem,
including any modifications specified by the
CONTROL command.
This is a nonsensitive command and has been updated to include the accurate state of
the
ACSCTL file.
Syntax Summary
STATUS [/OUT <file-spec>/] <object-spec> [, DETAIL]
Syntax Description
OUT file-spec
specifies a file for the output of this command. The file can be on the same
physical system as the ACS subsystem or on any system in the same Expand
network.
object-spec
specifies the name of the ACS object. The fully qualified object-spec has the
format:
[ ACS ] [ system-name.]$ZACS
system-name is the physical, Guardian name of the system in which the object is
being added and configured.
If you have specified the SCF object type (ACS) or any portion of the object name (
acs-spec) in a prior ASSUME command, you can omit it in this command. For
information on the
ASSUME command, see the SCF Reference Manual.
Domain
Count
SrvClass
Count
Link
Count
Link
Max
Requester
Count
Send Avg
(STD)
Send Max
00 00 00 00 00 0.0(0.0) 00
Domain
Count
SrvClass
Count
Link
Count
Link
Max
Requester
Count
Send Avg
(STD)
Send Max
00 00 00 00 00 0.0(0.0) 00