TS/MP Release Supplement

HP NonStop TS/MP Release Supplement—546055-006
6-1
6 Installing and Configuring
This section includes these topics:
•
Prerequisites
•
Installing TS/MP 2.3 / 2.4 versions
•
Configuring and Starting the ACS Subsystem
•
Starting TS/MP PATHMON and Requesters
For information on backing out your installation from TS/MP 2.3 to TS/MP 2.0, see
Appendix A, Backing Out Your Installation to TS/MP 2.0
.
Prerequisites
The following conditions must be met before installing TS/MP 2.3:
•
TS/MP 2.3 cannot reside on the same SYSnn as TS/MP 2.0.
•
The ACS subsystem must reside in the same physical system as TS/MP 2.3.
•
You must start the ACS subsystem before starting and using TS/MP 2.3.
Note. Before starting TS/MP PATHMON processes or Pathsend requesters, you must install
TS/MP 2.3 or later versions, configure, and start the ACS subsystem.
The installation and configuration steps of TS/MP 2.3 are also applicable for later versions.