TS/MP Release Supplement

Installing and Configuring
HP NonStop TS/MP Release Supplement—546055-006
6-3
Migration Considerations
$ZZKRN process to use the ROUT program file residing at the current SYSnn
subvolume. The TS/MP 2.0 LINKMON or ROUT program file is always
installed at current
SYSnn, and the $ZZKRN process always uses the ROUT
program file at the current
SYSnn subvolume to start the ROUT process during
the system load, or a processor reload, or when the ROUT process must be
restarted. As a result, the
$ZZKRN process acts as the process manager for
TS/MP 2.0 LINKMON or ROUT process. Once the TS/MP 2.0 LINKMON or
ROUT processes are started (by the
$ZZKRN process), they cannot be stopped
using TACL STOP command. Also, TS/MP 2.0 LINKMON or ROUT process
disables its stop mode and this prevents the SCF ABORT PROCESS
$ZZKRN.#ROUT command from stopping the ROUT process. After installation
of the TS/MP 2.3, and before system loading, logon with
SUPER.SUPER and
rename the TS/MP 2.3 ROUT program file as follows:
TACL>RENAME $SYSTEM.<SYSnn>.ROUT,
$SYSTEM.<SYSnn>.<renamed-file>
where <SYSnn> is the latest SYSnn subvolume in which TS/MP 2.3 ROUT
program file is present.
b. After system loading, the TS/MP 2.0 LINKMON or ROUT entry must be deleted
from the
$ZZKRN process table as per the following steps:
$SYSTEM.STARTUP> scf
1->ASSUME PROCESS $ZZKRN
2-> NAMES *
NONSTOP KERNEL - NAMES PROCESS \<system-name>.$ZZKRN.*
Process
$ZZKRN.#OSM-APPSRVR $ZZKRN.#OSM-CIMOM
$ZZKRN.#OSM-CONFLH-RD $ZZKRN.#OSM-OEV
$ZZKRN.#QATRAK $ZZKRN.#QIOMON
$ZZKRN.#ROUT $ZZKRN.#ROUTING-DIST
$ZZKRN.#SP-EVENT $ZZKRN.#TFDSHLP
$ZZKRN.#UNCP $ZZKRN.#ZHOME
$ZZKRN.#ZLOG $ZZKRN.#ZPMON
$ZZKRN.#ZSLM2 $ZZKRN.#ZZKRN
$ZZKRN.#ZZLAN $ZZKRN.#ZZSTO
$ZZKRN.#ZZWAN
3-> STATUS PROCESS $ZZKRN.#ROUT
NONSTOP KERNEL - Status PROCESS \<system-
name>.$ZZKRN.#ROUT