TS/MP Release Supplement

Installing and Configuring
HP NonStop TS/MP Release Supplement—546055-006
6-7
Starting Domain Coordinator Process ($ZACS)
This attribute is mandatory.
HOMETERM home-term
specifies the home terminal for the ACS manager process. home-term has the
format:
hometerm-file-spec.
This attribute is mandatory.
Starting Domain Coordinator Process ($ZACS)
You must start the $ZACS process before you configure the ACS subsystem.
Procedure:
Use the
SCF START command interactively or in an OBEY file to start the $ZACS
process in the local system, as follows:
ASSUME PROCESS $ZZKRN
START #ZACS
The ACS domain coordinator process is started as
$ZZKRN.#ZACS. The TACL name
for the process is
$ZACS.
Use the
SCF STATUS and INFO commands to obtain information about $ZACS, as
follows:
STATUS PROCESS $ZZKRN.#ZACS, DETAIL
INFO PROCESS $ZZKRN.#ZACS, DETAIL
Configuring the ACS Subsystem
This step configures the ACS subsystem by specifying a domain name and adding the
physical system to the domain. The domain name must be unique; it must not
duplicate any other ACS domain name on any other system in the Expand network. HP
recommends that you use the system name for the domain name.
Procedure:
Use the
SCF ADD command interactively or in an OBEY file to add and configure the
ACS subsystem. Example 6-1
adds an ACS object to an ACS domain, which is
installed on the
\MARS system; names the ACS domain MARS; and specifies the log
files. It also asks ACS to use the file
$SYSTEM.SYSTEM.ACSCTL to read any Pathway
domain configuration information specified in the file.