TS/MP Release Supplement

HP NonStop TS/MP Release Supplement—546055-006
7-1
7 Managing the ACS Subsystem
This section includes these topics:
•
Modifying the Configuration
•
Displaying Information
°
Displaying ACS Subsystem Configuration
°
Displaying ACS Domain Coordinator ($ZACS) Name
°
Displaying ACS Subsystem and Processor Status
°
Displaying ACS Subsystem Version
•
Restarting ACS Subsystem Processes in a CPU
•
Restarting the ACS Subsystem
•
Stopping the ACS Subsystem
Modifying the Configuration
Use the SCF ALTER command to permanently modify attribute values for the ACS
subsystem. The attribute values are:
•
LOG1 or LOG2 files
•
domain name
•
ACSCTL file
•
HIGHPIN configuration of the ROUT process
The values specified with the
ALTER command remain in effect until the ALTER
command is run again.
Procedure:
To alter the ACS subsystem attributes:
1. Stop the Pathsend requesters.
For information on stopping Pathsend requesters, see the
TS/MP System
Management Manual.
2. Use the
STOP command to stop the ACS subsystem.
For more information on the
STOP command, see STOP Command.
3. Use the
STATUS command to verify that the ACS subsystem has stopped. For
more information on this command, see STATUS Command
.
4. Use the ALTER command to modify the subsystem configuration.
For more information on this command, see ALTER Command
.