TS/MP Release Supplement

SCF Command Reference for the ACS Subsystem
HP NonStop TS/MP Release Supplement—546055-006
8-3
Supported Commands
(for example, ACSPM for the ACS subsystem) and forwards the command to that
product module.
The domain coordinator (
$ZACS) processes the commands; the ACS product module
parses the commands specific to the ACS subsystem and formats the display of
results. The domain coordinator process must be started before you can run any ACS-
specific SCF commands.
The SCP process (system default name
$ZNET) enables an SCF process to monitor
and control the ACS subsystem by communicating with the domain coordinator
process, which is a NonStop process pair that manages event communication within
the local system and is the boot process for the ACS subsystem.
The Subsystem Programmatic Interface (SPI) messages support communication
between the SCP and the ACS subsystem.
Supported Commands
This subsection includes the following topics:
•
List of ACS Subsystem-specific Commands
•
Syntax Help for SCF Commands
List of ACS Subsystem-specific Commands
Most ACS subsystem commands are valid only for specific states, as shown in
Table 8-1
. The table also lists the ACS subsystem commands that are SCF-sensitive
and SCF-nonsensitive.
Table 8-1. SCF Commands for ACS Subsystems
Command SCF
Sensitive
SCF
Nonsensitive
Valid in These States
ADD X - UNKNOWN
ALTER X - DEFINED, STOPPED
CONTROL X - STARTED
DELETE X - DEFINED, STOPPED
INFO - X UNKNOWN, DEFINED, STARTING,
STARTED, STOPPING, STOPPED
NAMES - X UNKNOWN, DEFINED, STARTING,
STARTED, STOPPING, STOPPED
START X - DEFINED, STOPPED
STATS - X STARTED