TS/MP Release Supplement

SCF Command Reference for the ACS Subsystem
HP NonStop TS/MP Release Supplement—546055-006
8-7
ACS Subsystem-specific SCF Commands
Syntax Summary
ADD [/OUT <file-spec>/] <object-spec>
{, DOMAIN <domain-name>}
{, { ALL } ,{ENABLE | DISABLE} }
[, ACSCTL <acsctl-file>]
[, LOG1 [<logfile-name>:<format>:<filter>]]
[, LOG2 [<logfile-name>:<format>:<filter>]]
[, HIGHPINROUTS {ON | OFF}]
Syntax Description
OUT file-spec
specifies a file for the output of this command. The file can be on the same
physical system as the ACS subsystem or on any system in the same Expand
network.
object-spec
specifies the name of an ACS object to be added to the specified physical system.
The fully qualified
object-spec has the format:
[ ACS ] [ system-name.]$ZACS
system-name is the physical, Guardian name of the system in which the object is
being added and configured.
If you have specified the SCF object type (ACS) or any portion of the object name
(acs-spec) in a prior ASSUME command, you can omit it in this command. For
information on the
ASSUME command, see the SCF Reference Manual.
If you have not used a prior
ASSUME command and you omit system-name, the
command defaults to the local physical system.
DOMAIN "domain-name"
specifies the name of the ACS domain to which the physical system is being
added. This attribute is mandatory.
domain-name is a string from one to seven alphanumeric characters enclosed in
double quotes ("). The first character must be an alphabet, for example, "Mars" or
"Pluto3".
Note. For TS/MP 2.3, HP strongly recommends that you specify the system name for the
domain name; the specified domain name must be unique to domain names specified for any
other ACS subsystems in other physical systems.