TS/MP Release Supplement

SCF Command Reference for the ACS Subsystem
HP NonStop TS/MP Release Supplement—546055-006
8-8
ACS Subsystem-specific SCF Commands
ALL
specifies that ACS subsystem functions are configured for all processors in the
system. This attribute is mandatory
.
ENABLE
For TS/MP 2.3, the ENABLE attribute is required but not functional.
DISABLE
For TS/MP 2.3, the DISABLE attribute is not functional. It is reserved for future
use.
LOG1 log-file-name:"format" : "filter" and LOG2 log-file-name: "format":
"filter"
specifies the names of the files used for logging events and specifies the format
and filters of those messages. Event messages are used to report to an operator
or application program through the Event Management Service (EMS). Log files
LOG1 and LOG2 can be used to override a previously configured log file.
LOG1 and LOG2 are optional parameters. If the specified file is not supplied for
LOG1 or LOG2 options, then that log is disabled. If the both logs are unusable or
disabled then ACS will use the $0.”EMS”:” ALL” for log messages.
log-file-name
specifies a Guardian disk file or process name. If you specify a disk file, an
unstructured file is automatically created if the file does not exist.
"format"
specifies the format in which the log messages are logged, enclosed in double
quotes ("). Valid values are:
"filter"
specifies which type of messages are logged, enclosed in double quotes (").
Valid values are:
Note. For TS/MP 2.3, the ACS subsystem functions are automatically configured for all CPUs
in the system.
Note. If you turn off the logging function by closing a current log file, all internally queued
messages are lost.
"EMS" Log messages are formatted as event messages.
"TEXT" Log messages are formatted as text messages.