TS/MP Supplement for Limits Relief (H06.05+, J06.03+)

has the value of ZACL-VAL-EVENT-LEVEL-STATUS.
ZACL-TKN-EVENT-CPU-NUMBER token-type ZSPI-TYP-INT.
contains the number of the physical CPU that was started on the system where the event
message was generated. This token is the subject of the event message.
Cause. The ACS subsystem processes in the specified CPU were started in response to a
START command or were restarted in response to a CONTROL command.
Effect. Pathsend operations initiated in the CPU no longer fail with
FESCLINKMONCONNECT errors.
Recovery. This is an informational message only; no corrective action is needed.
EMS Messages 1030 through 1039
1030 ZACL-EVT-CPU-STOPPED
Event-Message Text.
1030 - Core processes stopped in CPU cpu-number
Unconditional Tokens
ZACL-TKN-EVENT-LEVEL token-type ZACL-TYP-EVENT-LEVEL.
has the value of ZACL-VAL-EVENT-LEVEL-ERROR.
ZACL-TKN-EVENT-CPU-NUMBER token-type ZSPI-TYP-INT.
contains the number of the physical CPU in which the ACS subsystem processes were
stopped on the system where the event message was generated. This token is the subject
of the event message.
Cause. One or all of the ACS subsystem processes in a CPU on the local system failed or were
stopped in response to a STOP command. If due to a failure, the physical CPU may have failed.
Effect. Pathsend operations initiated in the CPU fail with FESCLINKMONCONNECT errors
until the core processes are restarted.
Recovery. Use the CONTROL ACS command to restart the ACS subsystem processes in the
CPU.
1031 ZACL-EVT-LOG-FILE-ERROR
Event-Message Text.
1031 - Event log file operation procedure() failed, file file-name, error errnum