TS/MP Supplement for Limits Relief (H06.05+, J06.03+)

Use the STATUS command to monitor the progress of the START command, as follows:
STATUS ACS $ZACS
If you use an OBEY file, include some delay time between the START command and
subsequent SCF commands.
7. Start TS/MP PATHMON and Requesters
For applications that use Pathsend requesters, you must start $ZACS and the ACS subsystem
before starting PATHMON processes and your applications. See the TS/MP System
Management Manual for information on starting PATHMON.
Prev Up Next
Chapter 4. Introduction to the ACS
Subsystem
Home
Chapter 6. Managing the ACS
Subsystem
528626.002