TS/MP Supplement for Limits Relief (H06.05+, J06.03+)

Displaying ACS subsystem and processor status
Use the STATUS command to display the current, operational status of the ACS subsystem. For
detailed information about this command, see STATUS in Chapter 7. For example:
STATUS ACS $ZACS, DETAIL
Displaying ACS subsystem version
Use the SCF VERSION command to display the version number of the ACS subsystem. For
detailed information about this command, see VERSION in Chapter 7. For example:
VERSION ACS $ZACS, DETAIL
Restarting ACS Subsystem Processes in a CPU
Use the CONTROL command to restart ACS subsystem processes in one or more CPUs. Changes
made with the CONTROL command modify the operational status of the ACS subsystem, not the
ACS subsystem configuration. For detailed information about this command, see CONTROL in
Chapter 7. For example:
CONTROL ACS $ZACS, PROCESSORLIST (2, 3), ENABLE
Restarting the Subsystem
1. Stop the Pathsend Requesters
2. Start $ZACS
3. Start the ACS Subsystem
4. Restart the Pathsend Requesters
A complete description for initially configuring and starting the ACS subsystem during installation
is described in Chapter 5, Installing and Configuring. To restart the subsystem when it is in the
STOPPED state, follow these steps:
1. Stop the Pathsend Requesters
For information on stopping Pathsend requesters, see the TS/MP System Management Manual.
2. Start $ZACS
1. Check whether $ZACS is
started.
Use the SCF STATUS PROCESS command. For example:
STATUS PROCESS $ZZKRN.#ZACS, DETAIL