TS/MP Supplement for Limits Relief (H06.05+, J06.03+)

DELETE
INFO
NAMES
START
STATUS
STOP
VERSION
ADD
Use the ADD command to define and add a physical system (an ACS object) to an ACS
domain, specify the file names for log files, and specify a domain name. (In this version of
ACS, an ACS domain can contain one physical system.)
This is a sensitive command.
Syntax Summary
ADD [ /OUT file-spec / ] , [ object-spec ]
, DOMAIN " domain-name"
, ALL
, ENABLE
, LOG1 log-file-name:"format":" filter"
[ ,LOG2 log-file-name:"format":" filter" ]
, ACSCTL $SYSTEM.ZACS.ACSCTL
Syntax Descriptions
OUT file-spec
specifies a file for the output of this command. The file can be on the same physical
system as the ACS subsystem or on any system in the same Expand network.
object-spec
specifies the name of an ACS object to be added to the specified physical system. The
fully qualified object-spec has the format:
[ ACS ] [ system-name.]$ZACS
system-name is the physical, Guardian name of the system in which the object is
being added and configured.
If you specify the SCF object type (ACS) or any portion of the object name (
acs-spec) in a prior ASSUME command, you can omit it in this command. For