TS/MP System Management Manual (H06.05+, J06.03+)

HP NonStop TS/MP System Management Manual—541819-007
xi
What’s New in This Manual
Manual Information
HP NonStop TS/MP System Management Manual
Abstract
This manual describes the interactive management interface to the HP NonStop™
TS/MP; it is intended for system managers and operators. It provides guidelines for
configuring and controlling a TS/MP transaction processing system and its objects, and
for monitoring the status and performance of objects controlled by PATHMON in a
Pathway environment. It also provides the syntax for all relevant PATHCOM
commands, in addition to the cause, effect, and recovery information for all PATHMON,
PATHCOM, and LINKMON error messages.
Product Version
NonStop TS/MP 2.0, 2.1, 2.3, and 2.4
Supported Release Version Updates (RVUs)
This publication supports J06.03 and all subsequent J-series RVUs and H06.05 and all
subsequent H-series RVUs, until otherwise indicated by its replacement publications.
For TS/MP 2.4, you must be running J06.05 and all subsequent J-series RVUs and
H06.16 and all subsequent H-series RVUs.
Document History
New and Changed Information
Changes to the 541819-007 manual:
•
Updated the description of REQ CNT on page 7-3.
•
Updated the description of MAX WAITS on page 7-3.
•
Updated the description of % DYNAMIC on page 7-3.
•
Updated the description of REQ CNT for SEND on page 7-5.
Part Number Published
541819-007 November 2010
Part Number Product Version Published
541819-003 NonStop TS/MP 2.3 May 2008
541819-004 NonStop TS/MP 2.3 December 2008
541819-005 NonStop TS/MP 2.3 and 2.4 May 2009
541819-006 NonStop TS/MP 2.0, 2.3, and 2.4 May 2010
541819-007 NonStop TS/MP 2.0, 2.1, 2.3, and 2.4 November 2010