TS/MP System Management Manual (H06.05+, J06.03+)

Overview of PATHCOM
HP NonStop TS/MP System Management Manual—541819-007
8-4
Command and Object Relationships
Command and Object Relationships
Table 8-2 summarizes the relationship between the PATHCOM commands and the
different PATHMON-controlled objects, the PATHCOM process, LINKMON processes
or ACS subsystem processes, and tell messages.
STATUS Displays the current status of any
PATHMON-controlled object or a
LINKMON process linked to a server
class
LINKMON*, PATHMON
process, PATHWAY,
SERVER
* Although LINKMON is listed here as a valid object, it is not like other NonStop
TS/MP objects. LINKMON is not a PATHCOM object because it cannot be
controlled by PATHCOM commands; PATHCOM can only obtain status
information about LINKMON processes.
STOP Stops a PATHMON-controlled object PATHMON process,
SERVER
SWITCH Causes primary and backup processes to
exchange functions
PATHMON process
THAW Removes the prohibition imposed with the
FREEZE command on use of a server
class
SERVER
Table 8-2. Commands and Objects
Objects
PATHCOM Commands PATHWAY PATHMON SERVER LINKMON
ADD x
ALTER x
CONTROL x
DELETE x
FREEZE x
INFO x x x
LOG1, LOG2 x
PRIMARY x
RESET x
SET x x x
SHOW x
Table 8-1. PATHCOM Commands (page 3 of 3)
PATHCOM
Commands Description Valid Objects
*The CONTROL TERMs command must be issued when TERM is in the STOPPED state for COUPLE
request.