TS/MP System Management Manual (H06.05+, J06.03+)

PATHCOM Operation Commands
HP NonStop TS/MP System Management Manual—541819-007
10-8
HELP Command
•
If the following commands are entered at the PATHCOM prompt:
\NSSYS.$VOL.SUBVOL 11> PATHCOM
$X30Q: PATHCOM - T0845H02 - (30APR09)
(C)2008-2009 Hewlett Packard Development Company, L.P.
OPEN $PM
^
$X30Q: ERROR - FILE OPEN ERROR - $PM - nonexistent device
(14)
= [ SERVER SRV1 is configured in $PM1
= OPEN $PM1
= ALTER SRV1, NUMSTATIC 1
= ALTER SRV1, DEBUG ON
To edit and execute the fourth command using number, enter:
= FC 4
The fourth command is displayed as:
ALTER SRV1, NUMSTATIC 1
. <enter>
=
To edit and execute a command using string, enter:
= FC AL
The command starting with “AL” that is executed last, is displayed:
= ALTER SRV1, NUMSTATIC 1
HELP Command
Use the HELP command to display or list to a file the command syntax for all
PATHCOM commands.
OUT list-file
specifies the name of a file to which PATHCOM directs the HELP output. If you
omit this option, the output goes to the PATHCOM list file; this is typically the home
terminal.
ALL
lists the syntax for all PATHCOM commands.
HELP [ / OUT list-file / ] [ ALL ]
[ COMMANDS ]
[ <command-name> ]
[ <“detail-name”> ]
[ <error-num> ]