TS/MP System Management Manual (H06.05+, J06.03+)

PATHCOM Operation Commands
HP NonStop TS/MP System Management Manual—541819-007
10-11
HISTORY Command
Examples
•
When five commands are entered at the PATHCOM prompt:
\NSSYS.$VOL.SUBVOL 11> PATHCOM
$X30Q: PATHCOM - T0845H02 - (30APR09)
(C)2008-2009 Hewlett Packard Development Company, L.P.
= [ SERVER SRV1 is configured in $PM1
= OPEN $PM1
= ALTER SRV1, NUMSTATIC 1
= ALTER SRV1, DEBUG ON
= ALTER SRV1, HOMETERM $ZTNT.#PTA2AK3
= ALTER SRV1, PROCESS $PROC
•
To display the last three commands, enter:
= HISTORY 3
•
In response, PATHCOM displays the following output:
3>ALTER SRV1, DEBUG ON
4>ALTER SRV1, HOMETERM $ZTNT.#PTA2AK3
5>ALTER SRV1, PROCESS $PROC