TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Environment Control Commands
HP NonStop TS/MP System Management Manual—541819-007
11-14
SET PATHWAY Command
pw-attribute
For information about configuration limits for environments, see Appendix C,
Configuration Limits and Defaults.
MAXASSIGNS number
is the maximum number of ASSIGN definitions that you can specify across all the
server classes in the Pathway environment. Each SET SERVER ASSIGN attribute
counts as one toward the value of this attribute.
number must be a value from 0 to 4095 (for TS/MP 2.0 and 2.1) or 0 to 8191 (for
TS/MP 2.3 and later versions). The maximum number of ASSIGNs allowed by
Pathway per server class and across all server classes in a given Pathway
environment is 4095 (for TS/MP 2.0 and 2.1) or 8191 (for TS/MP 2.3 and later
versions).
This attribute is required. It has no default.
SET PATHWAY pw-attribute [ , pw-attribute ]...
pw-attribute is:
MAXASSIGNS number
MAXPARAMS number
MAXSERVERCLASSES number
MAXSERVERPROCESSES number
MAXSTARTUPS number
MAXTCPS number
MAXTERMS number
MAXDEFINES number
MAXEXTERNALTCPS number
MAXLINKMONS number
MAXPATHCOMS number
MAXPROGRAMS number
MAXSPI number
MAXTELLQUEUE number
MAXTELLS number
MAXTMFRESTARTS number
NODEINDEPENDENT [ON | OFF]
OWNER ownerid
SECURITY security-attribute
Note. For more information on TS/MP 2.3 and later versions, see the TS/MP Release
Supplement.