TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Environment Control Commands
HP NonStop TS/MP System Management Manual—541819-007
11-22
Example
Quotation marks are required. The default is “N” (for TS/MP 2.0 and 2.1) and “O”
(for TS/MP 2.3 and later versions).
Consideration
All Pathway object attributes can be changed before a cold start.
Example
These SET PATHWAY commands define a sample PATHMON environment:
SET PATHWAY MAXASSIGNS 15
SET PATHWAY MAXDEFINES 20
SET PATHWAY MAXLINKMONS 16
SET PATHWAY MAXPARAMS 5
SET PATHWAY MAXPATHCOMS 2
SET PATHWAY MAXSERVERCLASSES 5
SET PATHWAY MAXSERVERPROCESSES 25
SET PATHWAY MAXSPI 5
SET PATHWAY MAXSTARTUPS 5
SET PATHWAY MAXTMFRESTARTS 5
SET PATHWAY NODEINDEPENDENT ON
SET PATHWAY OWNER \*.8,8
SET PATHWAY SECURITY "U"
“N” Any local or remote user
“C” Any member of owner's community (local or remote user having same
group ID as owner)
“U” Any member of owner's user class (local or remote user having same
group ID and user ID as owner)
Note. For more information on TS/MP 2.4 and later versions, see the TS/MP Release
Supplement Manual.
Caution. The owner of this system is the super ID. Allowing the security to default to “N”
results in a security risk for your system.
Note. The configuration in this example does not include requester objects that run under
Pathway/iTS.