TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Environment Control Commands
HP NonStop TS/MP System Management Manual—541819-007
11-25
SHUTDOWN2 Command
AB or ABORT
aborts all terminals and allows all other objects such as TCPs and server
classes to complete outstanding work before stopping.
The PATHCOM process is suspended until the shutdown request completes or
until the Break key is pressed. After shutdown, the PATHCOM prompt is
returned.
IM or IMMEDIATE
stops all server processes and Pathway/iTS TCPs immediately.
The PATHCOM is suspended until the shutdown request completes. After
shutdown, the PATHCOM prompt is returned.
STATUS
specifies whether status information is to be displayed during a shutdown.
The default is QUIET.
QU or QUIET
causes PATHCOM not to display any messages until the shutdown request
completes. After the shutdown request is completed, PATHCOM displays the
results of the shutdown.
AG or AGGREGATE
causes PATHCOM to display the Pathway environment status every 20
seconds while shutdown is executing. Regular status display enables the
operator to monitor the shutdown process. Status continues to be displayed
until shutdown completes.
UNTIL
specifies the time interval in which the shutdown process is to complete.
The default is DONE.
DONE
causes PATHCOM to suspend operation until shutdown completes or until the
Break key is pressed.
TIMEOUT
returns control to the PATHCOM process in the specified time. The UNTIL
TIMEOUT option is equivalent to pressing the Break key after the specified
time.
The time is specified by a number followed by HRS, MINS, or SECS. If
shutdown completes before the timeout occurs, the PATHCOM prompt is