TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Environment Control Commands
HP NonStop TS/MP System Management Manual—541819-007
11-30
STATUS LINKMON Command
Display Format
The format of the display returned by the STATUS LINKMON command is shown in
Example 11-1. This format is similar to the one for the STATUS TCP command, except
that the DETAIL option is not available with the STATUS LINKMON command. The
fields are described below.
The fields in this display are as follows:
Examples
This command displays status information for all LINKMON processes communicating
with the PATHMON process:
STATUS LINKMON *
These commands display status information for a specific LINKMON process running
on a specific node:
STATUS LINKMON L\NWREG.$ZL05
STATUS L\NWREG.$ZL05
This command directs status information to a specified output file:
STATUS/OUT STATFLE/LINKMON L\CPTNO.$ZL05
Example 11-1. STATUS LINKMON Display Format
LINKMON STATE ERROR INFO PROCESS CPU
lm-name state pw-error info process-name cpu
. . . . . .
. . . . . .
. . . . . .
Display Field Description
LINKMON Full name of the LINKMON process, including the node name
STATE Current state of the LINKMON process. The only possible value is:
RUNNING The LINKMON process is running and communicating with
the PATHMON process
ERROR Pathway error number
INFO Additional information regarding the error number. See the error messages
listed in Section 13, PATHMON Messages (Numbers 1000-1499)
through
Section 17, LINKMON Log Messages.
PROCESS Process name of the LINKMON process
CPU processor number in which the LINKMON process is currently running