TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Environment Control Commands
HP NonStop TS/MP System Management Manual—541819-007
11-34
STATUS PATHWAY Command
OUT list-file
directs output to the file that you specify; this could be a DEFINE name. If you omit
this option, the PATHMON process writes the output to the PATHCOM list file; this
is typically the home terminal.
COUNT number
determines the number of times that the status screen is displayed until the Break
key is used, or until the Pathway environment is shut downwhichever occurs
first. The default count is 1.
INTERVAL number HRS | MINS | SECS
determines the delay between the status displays. The delay is based on the
value specified by number in hours, minutes, or seconds. The default is no delay
between STATUS PATHWAY displays.
The STATUS PATHWAY display formats are described in this discussion. For
information about the Pathway/iTS objects that appear in this display (EXTERNAL
TCPS, TCPS, and TERMS), see the Pathway/iTS System Management Manual.
Display Format  Running
Example 11-3 shows the format of the display returned by the STATUS PATHWAY
command while the system is running.
Display Format  During Shutdown
Example 11-4 shows the format of the display returned by the STATUS PATHWAY
command during a shutdown.
Example 11-3. STATUS PATHWAY Display Format (Running)
PATHWAY -- STATE = RUNNING
RUNNING
EXTERNALTCPS number
LINKMONS number
PATHCOMS number
SPI number
FREEZE
RUNNING STOPPED THAWED FROZEN PENDING
SERVERCLASSES number number number number number
RUNNING STOPPED PENDING
SERVERPROCESSES number number number
RUNNING STOPPED PENDING
TCPS number number number
RUNNING STOPPED PENDING SUSPENDED
TERMS number number number number