TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Environment Control Commands
HP NonStop TS/MP System Management Manual—541819-007
11-36
Example
Calculating Totals
Totals for each object can be calculated from these displays as follows:
Example
This command writes the status display to a file named STATFLE:
STATUS/OUT STATFLE/PATHWAY
STOP PATHMON Command
Use the STOP PATHMON command to stop the PATHMON process pair. To
successfully run this command, you must first issue a SHUTDOWN2 PATHWAY
command.
Consideration
All processes started by the PATHMON process and still running when the STOP
PATHMON command completes successfully are orphaned.
To avoid orphaned processes, first use the STATUS PATHWAY command, before
executing the STOP PATHMON command, to determine what type of processes are
running. Use the STATUS command on each type of object to find the names of the
active processes, then stop each process. After all processes are stopped, then run
the STOP PATHMON command.
Total… Is Calculated By Adding Together the Fields…
Total server classes RUNNING + STOPPED
OR
THAWED + FROZEN+ FREEZE PENDING
Total server processes RUNNING + STOPPED + PENDING
Total TCPs (Pathway/iTS) RUNNING + STOPPED + PENDING
Total terminals
(Pathway/iTS)
RUNNING + STOPPED + PENDING + SUSPENDED
STOP PATHMON