TS/MP System Management Manual (H06.05+, J06.03+)

SERVER Commands
HP NonStop TS/MP System Management Manual—541819-007
12-40
STATUS SERVER Command
STATUS SERVER Command
Use the STATUS SERVER command to display the current status of a server class.
This command displays status information for server classes linked to link managers
such as LINKMON processes.
OUT list-file
directs output to the file that you specify; this could be a DEFINE name. If you omit
this option, the PATHMON process writes the output to the PATHCOM list file; this
is typically the home terminal.
name
specifies the name of a previously defined and added server class.
PROCESS $process-name
specifies the name of the server process associated with the designated server
class.
PROCESSES
displays the status of all server processes associated with the specified server
class.
DETAIL
includes status information on the servers processes associated with the specified
server class.
FREEZE
displays the names of the server classes in the FROZEN or FREEZEPENDING
state. For each server class that is in the FREEZEPENDING state, the names of
the terminals that have not yet accepted the freeze of the server class are also
listed. The PATHMON process does not report FREEZE information about
external link managers such as LINKMON processes.
STATUS [ / OUT list-file / ]
{ [ SERVER ] name [ , PROCESS $process-name ] }
{ [ SERVER ] name [ , PROCESSES ] }
{ [ SERVER ] name [ , DETAIL ] }
{ [ SERVER ] name [ , FREEZE ] }
{ [ SERVER ] ( name [ , name ]... ) [ , PROCESSES ] }
{ [ SERVER ] ( name [ , name ]... ) [ , DETAIL ] }
{ [ SERVER ] ( name [ , name ]... ) [ , FREEZE ] }
{ SERVER * [ , PROCESSES ] [ , DETAIL ] [ , FREEZE ] }
{ FREEZE }