TS/MP System Management Manual (H06.05+, J06.03+)

SERVER Commands
HP NonStop TS/MP System Management Manual—541819-007
12-41
STATUS SERVER Command
If the FREEZE option is specified with SERVER *, and no server classes are in the
FREEZE-PENDING state, PATHCOM returns a prompt.
SERVER *
displays the status of all server classes defined for the Pathway environment.
STATUS FREEZE
displays the names of all server classes that are in the FROZEN or
FREEZE-PENDING state.
Display Format Without DETAIL
Following is the format of the display returned by the STATUS SERVER command
without the DETAIL option. This display is returned for these commands: STATUS
SERVER, STATUS SERVER PROCESS, and STATUS SERVER PROCESSES. The
fields are described below.
The fields in this display are as follows:
STATUS SERVER Display Format Without Detail
SERVER #RUNNING ERROR INFO
server-name running pw-error info [freeze-state]
. . . .
. . . .
. . . .
Display Field Description
SERVER Name of the server class.
#RUNNING Number of server processes in the server class that are currently running.
ERROR Pathway error number. This number includes any error that might occur
when the PATHMON process attempts to create a dynamic server.
INFO For additional information regarding the error number, see the error
messages listed in Section 13, PATHMON Messages (Numbers 1000-1499)
through Section 17, LINKMON Log Messages.
The freeze-state may also be displayed. Possible values are:
FREEZE-PENDING The server class received a FREEZE command, but
the state of one or more terminals delays the freeze
from completing. The STATUS SERVER FREEZE
command can be used to display the names of
these terminals.
FROZEN The server class is frozen. No communication can
take place with any server of the server class until
the class receives a THAW command.