TS/MP System Management Manual (H06.05+, J06.03+)

SERVER Commands
HP NonStop TS/MP System Management Manual—541819-007
12-43
STATUS SERVER Command
Display Format, PROCESSES Attribute, Without DETAIL
Following is the format of the display returned by the STATUS SERVER PROCESS or
STATUS SERVER PROCESSES commands without the DETAIL option. The fields not
already described are described below.
The additional fields returned in this display are as follows:
STATUS SERVER PROCESS[ES] Display Format
SERVER #RUNNING ERROR INFO
server-name running pw-error info [freeze-state]
. . . .
. . . .
. . . .
LINKER LINK COUNT
name links
. .
. .
. .
Display Field Description
LINKER Name of a link manager, such as a LINKMON process, that is currently
linked to the server.
LINKMON process names have the format: L\node.$process-name
L Identifies the process as a LINKMON process.
\node Name of the NonStop systemNonStop system on which
the LINKMON process is running.
$process-
name
LINKMON process name. LINKMON process names are
in the form $ZLnn, where nn is the number of the
processor where the LINKMON process resides.
LINK COUNT *If LINKDEPTH is greater than 1, shows the number of links from the link
manager to this server.
If LINKDEPTH is 1, shows the preference of the link manager for using this
server process over using other server processes in the server class.
Possible values are:
1 Highest preference; first link to be used for this class
2 Next highest preference; second link to be used for this
class
3 Lowest preference; third or subsequent link to be used
for this class
* For TS/MP 2.1 and higher versions, the link is selected depending on the response time of the server
processes.