TS/MP System Management Manual (H06.05+, J06.03+)

SERVER Commands
HP NonStop TS/MP System Management Manual—541819-007
12-47
THAW SERVER Command
Errors
This table lists the most common error that can occur during the processing of the
STOP SERVER command:
Examples
This command stops all the server classes in the Pathway environment. The never-
linked, non associative servers not following Guardian OPEN/CLOSE logic, will stop
after the specified WAIT time.
STOP SERVER *, WAIT 30 SECS
These commands stop the named server classes:
STOP CLASS-1
STOP SERVER CLASS-2
STOP (CLASS-3, CLASS-4)
This command stops all the server classes in the Pathway environment except never-
linked, non associative servers, that do not follow Guardian OPEN/CLOSE logic.
STOP SERVER *
THAW SERVER Command
Use the THAW SERVER command to allow link managers such as LINKMON
processes or ACS subsystem processes and TCPs to resume sending requests to
server processes in a frozen server class.
server-class
specifies the name of a previously defined and added server class.
SERVER *
resumes communication with all server classes in the PATHMON configuration file.
This Message… Is Displayed When…
*1059* FREEZE PENDING You have tried to issue a STOP SERVER command while a
FREEZE SERVER command is still in progress; the STOP
SERVER command fails.
To stop the server, wait until the freeze has completed, then
reissue the STOP SERVER command.
THAW { [ SERVER ] server-class }
{ [ SERVER ] ( server-class [, server-class ]... ) }
{ SERVER * }