TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Messages (Numbers 1000-1499)

HP NonStop TS/MP System Management Manual—541819-007

13-11

PATHMON Messages

1030

Cause. The LOG2 file is open.

Effect. None

Recovery. Informational message only; no corrective action is needed.

1031

Cause. A required PATHMON or PATHWAY object attribute is not defined.

Effect. The operation fails.

Recovery. Define the required attribute. For details about the required attributes for

those commands, see the SET PATHMON and the SET PATHWAY commands.

1032

Cause. An entry cannot be added because the PATHMON configuration file is full.

This is an internal error.

Effect. Entries cannot be added until the configuration file is available.

Recovery. Contact your HP representative and provide all relevant information as

follows:

•

Descriptions of the problem and accompanying symptoms

•

Details from the message(s) generated

•

Your PATHMON configuration file and the PATHMON process version

•

A description of the application task that was in progress when the error was

encountered

•

Supporting documentation such as Event Management Service (EMS) logs, trace

files, and dump files, if applicable

If your local operating procedures require contacting the Global Customer Support

Center (GCSC), supply your system number and the numbers and versions of all