TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Messages (Numbers 1000-1499)
HP NonStop TS/MP System Management Manual—541819-007
13-12
PATHMON Messages
1033
Cause. There is insufficient space in the PATHMON process’s free-space table.
Effect. The operation fails.
Recovery. Contact your HP representative for assistance.
1034
Cause. The PATHMON process cannot grant a link to a TCP or a LINKMON process
because no server processes are available. Either the TCP or LINKMON process is
already linked to all server processes in the class, or all processes in the class
currently have the maximum number of links (defined in the MAXLINKS attribute).
Effect. The requesting TCP or LINKMON process is not linked to the server class.
Recovery. Increase the value of the MAXSERVERS, MAXLINKS, or LINKDEPTH
attribute in the server class definition. (It is not recommended that you set
LINKDEPTH higher than 1 for servers other than communications-based servers, such
as HLS servers.)
1035
Cause. The specified entry does not exist. Either the wrong object name was used or
the desired object does not exist.
Effect. The operation fails.
Recovery. Correct the object name or add the object to the PATHMON configuration
file.
1036
Cause. There is an invalid system name in the definition of the indicated object.
Effect. The operation fails.
Recovery. Use an ALTER command to correct the system name in the object
definition.
*1033* PATHMON, NO INTERNAL FREESPACE AVAILABLE
*1034* link manager-name, NO SERVER AVAILABLE FOR REQUESTING
TCP
*1035* object-name, NO SUCH ENTRY
*1036* object-name, NO SUCH SYSTEM