TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Messages (Numbers 1000-1499)
HP NonStop TS/MP System Management Manual—541819-007
13-14
PATHMON Messages
Effect. The call to DEVICEINFO2 and the request fails. This error is not logged, but is
simply returned to the operator.
Recovery. For information regarding the specified error, see to the Guardian
Procedure Errors and Messages Manual.
1041
Cause. An error occurred during request initiation.
Effect. The request fails.
Recovery. For additional information, see the description associated with the nested
message.
1042
Cause. The indicated terminal has resumed processing.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1043
Cause. The specified object has started.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1045
Cause. The command cannot be executed because the object specified in the
command or its controlling object (for example, the TCP for a TERM) is not in the
appropriate state.
Effect. The request fails.
Recovery. Reissue the command when the indicated object or its controlling object is
in the appropriate state.
*1041* PATHMON, REQUEST HANDLER : < nested-message >
*1042* TERM term-name, RESUMED
*1043* object-name, STARTED
*1045* REQUEST NOT VALID FOR CURRENT STATE