TS/MP System Management Manual (H06.05+, J06.03+)

PATHMON Messages (Numbers 1000-1499)
HP NonStop TS/MP System Management Manual—541819-007
13-19
PATHMON Messages
1062
Cause. A STOP SERVER command was issued before the server class was frozen.
Effect. The command fails.
Recovery. Reissue the command after the server class is frozen.
1063
Cause. A START SERVER command was issued before the server class was thawed.
Effect. The command fails.
Recovery. Reissue the command after the server class is thawed.
1064
Cause. The specified server class is frozen.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1065
Cause. The specified server class is thawed.
Effect. None
Recovery. Informational message only; no corrective action is needed.
1066
Cause. You issued a TELL command but the SET PATHWAY MAXTELLQUEUE
attribute value is set to 0.
Effect. The tell message request fails.
Recovery. Enter a value between 1 and 300 for the MAXTELLQUEUE attribute.
*1062* MUST BE FROZEN
*1063* MUST BE THAWED
*1064* SERVER server-name, FROZEN
*1065* SERVER server-name, THAWED
*1066* TERMINALS NOT CONFIGURED TO RECEIVE TELL MESSAGES